kernelkit · troglobit · Mar 11, 2026 · Feb 25, 2026 · Feb 27, 2026 · Mar 2, 2026
diff --git a/board/aarch64/alder-alder/Config.in b/board/aarch64/alder-alder/Config.in
@@ -1,5 +1,6 @@
 config BR2_PACKAGE_ALDER_ALDER
 	bool "Alder"
 	depends on BR2_aarch64
+	select BR2_PACKAGE_LINUX_FIRMWARE_INSIDE_SECURE_MINIFW
 	help
 	  Alder
diff --git a/board/aarch64/marvell-cn9130-crb/Config.in b/board/aarch64/marvell-cn9130-crb/Config.in
@@ -1,5 +1,6 @@
 config BR2_PACKAGE_MARVELL_CN9130_CRB
 	bool "Marvell CN9130-CRB"
 	depends on BR2_aarch64
+	select BR2_PACKAGE_LINUX_FIRMWARE_INSIDE_SECURE_MINIFW
 	help
 	  Customer Reference Board for CN9130
diff --git a/board/aarch64/marvell-espressobin/Config.in b/board/aarch64/marvell-espressobin/Config.in
@@ -1,5 +1,6 @@
 config BR2_PACKAGE_MARVELL_ESPRESSOBIN
 	bool "Marvell ESPRESSObin"
 	depends on BR2_aarch64
+	select BR2_PACKAGE_LINUX_FIRMWARE_INSIDE_SECURE_MINIFW
 	help
 	  Marvell ESPRESSObin
diff --git a/board/aarch64/styx-dcp-sc-28p/Config.in b/board/aarch64/styx-dcp-sc-28p/Config.in
@@ -1,5 +1,6 @@
 config BR2_PACKAGE_STYX_DCP_SC_28P
 	bool "Styx DCP-SC-28P"
 	depends on BR2_aarch64
+	select BR2_PACKAGE_LINUX_FIRMWARE_INSIDE_SECURE_MINIFW
 	help
 	  Styx DCP-SC-28P
diff --git a/configs/aarch64_defconfig b/configs/aarch64_defconfig
@@ -27,7 +27,7 @@ BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNA
 BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.15"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.16"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
@@ -41,9 +41,6 @@ BR2_PACKAGE_DBUS_CXX=y
 BR2_PACKAGE_DBUS_GLIB=y
 BR2_PACKAGE_EUDEV_RULES_GEN=y
 # BR2_PACKAGE_EUDEV_ENABLE_HWDB is not set
-BR2_PACKAGE_GPSD_DEVICES="/dev/gps0"
-BR2_PACKAGE_GPSD_MAX_CLIENT_VALUE=2
-BR2_PACKAGE_GPSD_MAX_DEV_VALUE=1
 BR2_PACKAGE_GPTFDISK=y
 BR2_PACKAGE_GPTFDISK_SGDISK=y
 BR2_PACKAGE_MDIO_TOOLS=y

diff --git a/configs/aarch64_minimal_defconfig b/configs/aarch64_minimal_defconfig
@@ -27,7 +27,7 @@ BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNA
 BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.15"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.16"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
@@ -41,9 +41,6 @@ BR2_PACKAGE_DBUS_CXX=y
 BR2_PACKAGE_DBUS_GLIB=y
 BR2_PACKAGE_EUDEV_RULES_GEN=y
 # BR2_PACKAGE_EUDEV_ENABLE_HWDB is not set
-BR2_PACKAGE_GPSD_DEVICES="/dev/gps0"
-BR2_PACKAGE_GPSD_MAX_CLIENT_VALUE=2
-BR2_PACKAGE_GPSD_MAX_DEV_VALUE=1
 BR2_PACKAGE_GPTFDISK=y
 BR2_PACKAGE_GPTFDISK_SGDISK=y
 BR2_PACKAGE_MDIO_TOOLS=y
@@ -126,7 +123,6 @@ INFIX_DESC="Infix is an immutable, friendly, and secure operating system that tu
 INFIX_HOME="https://github.com/kernelkit/infix/"
 INFIX_DOC="https://www.kernelkit.org/infix/"
 INFIX_SUPPORT="mailto:[email protected]"
-BR2_PACKAGE_FEATURE_GPS=y
 BR2_PACKAGE_CONFD=y
 BR2_PACKAGE_NETD=y
 BR2_PACKAGE_CONFD_TEST_MODE=y

diff --git a/configs/arm_defconfig b/configs/arm_defconfig
@@ -28,7 +28,7 @@ BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNA
 BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.15"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.16"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/arm/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
@@ -43,9 +43,6 @@ BR2_PACKAGE_DBUS_CXX=y
 BR2_PACKAGE_DBUS_GLIB=y
 BR2_PACKAGE_EUDEV_RULES_GEN=y
 # BR2_PACKAGE_EUDEV_ENABLE_HWDB is not set
-BR2_PACKAGE_GPSD_DEVICES="/dev/gps0"
-BR2_PACKAGE_GPSD_MAX_CLIENT_VALUE=2
-BR2_PACKAGE_GPSD_MAX_DEV_VALUE=1
 BR2_PACKAGE_GPTFDISK=y
 BR2_PACKAGE_GPTFDISK_SGDISK=y
 BR2_PACKAGE_MDIO_TOOLS=y

diff --git a/configs/arm_minimal_defconfig b/configs/arm_minimal_defconfig
@@ -28,7 +28,7 @@ BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNA
 BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.15"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.16"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/arm/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
@@ -43,9 +43,6 @@ BR2_PACKAGE_DBUS_CXX=y
 BR2_PACKAGE_DBUS_GLIB=y
 BR2_PACKAGE_EUDEV_RULES_GEN=y
 # BR2_PACKAGE_EUDEV_ENABLE_HWDB is not set
-BR2_PACKAGE_GPSD_DEVICES="/dev/gps0"
-BR2_PACKAGE_GPSD_MAX_CLIENT_VALUE=2
-BR2_PACKAGE_GPSD_MAX_DEV_VALUE=1
 BR2_PACKAGE_GPTFDISK=y
 BR2_PACKAGE_GPTFDISK_SGDISK=y
 BR2_PACKAGE_MDIO_TOOLS=y
@@ -126,7 +123,6 @@ INFIX_DESC="Infix is an immutable, friendly, and secure operating system that tu
 INFIX_HOME="https://github.com/kernelkit/infix/"
 INFIX_DOC="https://www.kernelkit.org/infix/"
 INFIX_SUPPORT="mailto:[email protected]"
-BR2_PACKAGE_FEATURE_GPS=y
 BR2_PACKAGE_CONFD=y
 BR2_PACKAGE_NETD=y
 BR2_PACKAGE_CONFD_TEST_MODE=y

diff --git a/configs/riscv64_defconfig b/configs/riscv64_defconfig
@@ -52,9 +52,6 @@ BR2_PACKAGE_DBUS_CXX=y
 BR2_PACKAGE_DBUS_GLIB=y
 BR2_PACKAGE_EUDEV_RULES_GEN=y
 # BR2_PACKAGE_EUDEV_ENABLE_HWDB is not set
-BR2_PACKAGE_GPSD_DEVICES="/dev/gps0"
-BR2_PACKAGE_GPSD_MAX_CLIENT_VALUE=2
-BR2_PACKAGE_GPSD_MAX_DEV_VALUE=1
 BR2_PACKAGE_GPTFDISK=y
 BR2_PACKAGE_GPTFDISK_SGDISK=y
 BR2_PACKAGE_MDIO_TOOLS=y

diff --git a/configs/x86_64_defconfig b/configs/x86_64_defconfig
@@ -26,7 +26,7 @@ BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNA
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/qemu/x86_64/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.15"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.16"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
@@ -41,9 +41,6 @@ BR2_PACKAGE_DBUS_CXX=y
 BR2_PACKAGE_DBUS_GLIB=y
 BR2_PACKAGE_EUDEV_RULES_GEN=y
 # BR2_PACKAGE_EUDEV_ENABLE_HWDB is not set
-BR2_PACKAGE_GPSD_DEVICES="/dev/gps0"
-BR2_PACKAGE_GPSD_MAX_CLIENT_VALUE=2
-BR2_PACKAGE_GPSD_MAX_DEV_VALUE=1
 BR2_PACKAGE_GPTFDISK=y
 BR2_PACKAGE_GPTFDISK_SGDISK=y
 BR2_PACKAGE_RNG_TOOLS=y

diff --git a/configs/x86_64_minimal_defconfig b/configs/x86_64_minimal_defconfig
@@ -26,7 +26,7 @@ BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNA
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/qemu/x86_64/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.15"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.16"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
@@ -41,9 +41,6 @@ BR2_PACKAGE_DBUS_CXX=y
 BR2_PACKAGE_DBUS_GLIB=y
 BR2_PACKAGE_EUDEV_RULES_GEN=y
 # BR2_PACKAGE_EUDEV_ENABLE_HWDB is not set
-BR2_PACKAGE_GPSD_DEVICES="/dev/gps0"
-BR2_PACKAGE_GPSD_MAX_CLIENT_VALUE=2
-BR2_PACKAGE_GPSD_MAX_DEV_VALUE=1
 BR2_PACKAGE_GPTFDISK=y
 BR2_PACKAGE_GPTFDISK_SGDISK=y
 BR2_PACKAGE_RNG_TOOLS=y
@@ -125,7 +122,6 @@ INFIX_DESC="Infix is an immutable, friendly, and secure operating system that tu
 INFIX_HOME="https://github.com/kernelkit/infix/"
 INFIX_DOC="https://www.kernelkit.org/infix/"
 INFIX_SUPPORT="mailto:[email protected]"
-BR2_PACKAGE_FEATURE_GPS=y
 BR2_PACKAGE_CONFD=y
 BR2_PACKAGE_NETD=y
 BR2_PACKAGE_CONFD_TEST_MODE=y

diff --git a/doc/ChangeLog.md b/doc/ChangeLog.md
@@ -3,6 +3,24 @@ Change Log
 
 All notable changes to the project are documented in this file.
 
+[v26.02.1][] - 2026-03-11
+-------------------------
+
+### Changes
+
+- Upgrade Linux kernel to 6.18.16 (LTS)
+- Add support for disabling WiFi and GPS features in builds
+- Add OSPF point-to-multipoint (P2MP) and hybrid interface type support.  This
+  also includes support for setting static neighbors, issue #1426
+
+### Fixes
+
+- Fix #1389: legacy name limit in firewalld triggered problems with policy names
+- Fix #1416: `show firewall` command show an error when the firewall is disabled
+- Fix instabilities in Zebra route manager after Frr upgrade in v26.02.0
+- Fix regression in MVEBU SafeXcel Crypto Engine for Marvell Armada SOCs (37xx,
+  7k, 8k, and CN913x series).  Firmware package lost in v26.01.0
+
 [v26.02.0][] - 2026-03-01
 -------------------------
 
@@ -1932,6 +1950,7 @@ Supported YANG models in addition to those used by sysrepo and netopeer:
 
 [buildroot]:  https://buildroot.org/
 [UNRELEASED]: https://github.com/kernelkit/infix/compare/v26.02.0...HEAD
+[v26.02.1]:   https://github.com/kernelkit/infix/compare/v26.02.0...v26.02.1
 [v26.02.0]:   https://github.com/kernelkit/infix/compare/v26.01.0...v26.02.0
 [v26.01.0]:   https://github.com/kernelkit/infix/compare/v25.11.0...v26.01.0
 [v25.11.0]:   https://github.com/kernelkit/infix/compare/v25.10.0...v25.11.0

diff --git a/doc/routing.md b/doc/routing.md
@@ -131,6 +131,66 @@ an Ethernet interface can be done as follows.
 admin@example:/config/routing/…/ospf/area/0.0.0.0/interface/e0/>
 </code></pre>
 
+
+### Point-to-Multipoint
+
+Point-to-Multipoint (P2MP) is used when multiple OSPF routers share a
+common network segment but should form individual adjacencies rather
+than electing a Designated Router (DR).  This is common in NBMA-like
+environments, DMVPN, or hub-and-spoke topologies.
+
+Infix supports two P2MP variants via the `interface-type` setting:
+
+| **Interface Type**    | **Behavior**                                   |
+|:----------------------|:-----------------------------------------------|
+| `hybrid`              | P2MP with multicast Hellos (broadcast-capable) |
+| `point-to-multipoint` | P2MP with unicast Hellos (non-broadcast)       |
+
+#### Hybrid (broadcast-capable P2MP)
+
+Use `hybrid` when all neighbors on the segment can receive multicast.
+Hello packets are sent to the standard OSPF multicast address (224.0.0.5)
+and neighbors are discovered automatically — no manual neighbor
+configuration is needed.
+
+<pre class="cli"><code>admin@example:/config/> <b>edit routing control-plane-protocol ospfv2 name default ospf</b>
+admin@example:/config/routing/…/ospf/> <b>set area 0.0.0.0 interface e0 interface-type hybrid</b>
+admin@example:/config/routing/…/ospf/> <b>leave</b>
+admin@example:/>
+</code></pre>
+
+#### Non-broadcast P2MP
+
+Use `point-to-multipoint` when the network does not support multicast.
+Hello packets are sent as unicast directly to each configured neighbor.
+Since neighbors cannot be discovered automatically, they must be
+configured explicitly using static neighbors (see below).
+
+<pre class="cli"><code>admin@example:/config/> <b>edit routing control-plane-protocol ospfv2 name default ospf</b>
+admin@example:/config/routing/…/ospf/> <b>set area 0.0.0.0 interface e0 interface-type point-to-multipoint</b>
+admin@example:/config/routing/…/ospf/> <b>leave</b>
+admin@example:/>
+</code></pre>
+
+
+### Static Neighbors
+
+When using non-broadcast interface types (such as `point-to-multipoint`),
+OSPF cannot discover neighbors via multicast.  Static neighbors must be
+configured so the router knows where to send unicast Hello packets.
+
+<pre class="cli"><code>admin@example:/config/> <b>edit routing control-plane-protocol ospfv2 name default ospf</b>
+admin@example:/config/routing/…/ospf/> <b>set area 0.0.0.0 interface e0 static-neighbors neighbor 10.0.123.2</b>
+admin@example:/config/routing/…/ospf/> <b>set area 0.0.0.0 interface e0 static-neighbors neighbor 10.0.123.3</b>
+admin@example:/config/routing/…/ospf/> <b>leave</b>
+admin@example:/>
+</code></pre>
+
+> [!NOTE]
+> Static neighbors are only needed for non-broadcast interface types.
+> With `hybrid` (or `broadcast`), neighbors are discovered automatically
+> via multicast.
+
 ### OSPF global settings
 
 In addition to *area* and *interface* specific settings, OSPF provides

diff --git a/package/confd/confd.mk b/package/confd/confd.mk
@@ -30,6 +30,11 @@ CONFD_CONF_OPTS += --enable-wifi
 else
 CONFD_CONF_OPTS += --disable-wifi
 endif
+ifeq ($(BR2_PACKAGE_FEATURE_GPS),y)
+CONFD_CONF_OPTS += --enable-gps
+else
+CONFD_CONF_OPTS += --disable-gps
+endif
 define CONFD_INSTALL_EXTRA
 	for fn in confd.conf resolvconf.conf; do \
 		cp $(CONFD_PKGDIR)/$$fn  $(FINIT_D)/available/; \
@@ -80,6 +85,12 @@ define CONFD_INSTALL_YANG_MODULES_WIFI
 	$(BR2_EXTERNAL_INFIX_PATH)/utils/srload $(@D)/yang/wifi.inc
 endef
 endif
+ifeq ($(BR2_PACKAGE_FEATURE_GPS),y)
+define CONFD_INSTALL_YANG_MODULES_GPS
+	$(COMMON_SYSREPO_ENV) \
+	$(BR2_EXTERNAL_INFIX_PATH)/utils/srload $(@D)/yang/gps.inc
+endef
+endif
 
 # PER_PACKAGE_DIR
 # Since the last package in the dependency chain that runs sysrepoctl is confd, we need to
@@ -109,6 +120,7 @@ CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_EXTRA
 CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_YANG_MODULES
 CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_YANG_MODULES_CONTAINERS
 CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_YANG_MODULES_WIFI
+CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_YANG_MODULES_GPS
 CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_IN_ROMFS
 CONFD_TARGET_FINALIZE_HOOKS += CONFD_CLEANUP
 

diff --git a/package/skeleton-init-finit/skeleton/etc/default/zebra b/package/skeleton-init-finit/skeleton/etc/default/zebra
@@ -1,2 +1,2 @@
 # --log-level debug
-ZEBRA_ARGS="-A 127.0.0.1 -u frr -g frr --log syslog --log-level err"
+ZEBRA_ARGS="-A 127.0.0.1 -a -s 90000000 -u frr -g frr --log syslog --log-level err"
diff --git a/package/skeleton-init-finit/skeleton/etc/finit.d/available/frr/mgmtd.conf b/package/skeleton-init-finit/skeleton/etc/finit.d/available/frr/mgmtd.conf
@@ -1,2 +1,3 @@
 service <!> pid:!/run/frr/mgmtd.pid env:-/etc/default/mgmtd \
-	[2345] mgmtd $MGMTD_ARGS -- FRR MGMT daemon
+	[2345] mgmtd $MGMTD_ARGS \
+	-- FRR MGMT daemon
diff --git a/package/skeleton-init-finit/skeleton/etc/finit.d/available/frr/ospfd.conf b/package/skeleton-init-finit/skeleton/etc/finit.d/available/frr/ospfd.conf
@@ -1,2 +1,3 @@
-service <!pid/zebra> env:-/etc/default/ospfd \
-	[2345] ospfd $OSPFD_ARGS -- OSPF daemon
+service <!pid/zebra> pid:!/run/frr/ospfd.pid env:-/etc/default/ospfd \
+	[2345] ospfd $OSPFD_ARGS \
+	-- OSPF daemon
diff --git a/package/skeleton-init-finit/skeleton/etc/finit.d/available/frr/ripd.conf b/package/skeleton-init-finit/skeleton/etc/finit.d/available/frr/ripd.conf
@@ -1,3 +1,3 @@
-service <pid/zebra> env:-/etc/default/ripd \
-	[2345] ripd $RIPD_ARGS
+service <pid/zebra> pid:!/run/frr/ripd.pid env:-/etc/default/ripd \
+	[2345] ripd $RIPD_ARGS \
 	-- RIP daemon
diff --git a/package/skeleton-init-finit/skeleton/etc/finit.d/available/frr/zebra.conf b/package/skeleton-init-finit/skeleton/etc/finit.d/available/frr/zebra.conf
@@ -1,3 +1,3 @@
-service <!pid/mgmtd> pid:!/run/frr/zebra.pid env:-/etc/default/zebra  \
-	[2345] zebra $ZEBRA_ARGS
+service <!pid/mgmtd> pid:!/run/frr/zebra.pid env:-/etc/default/zebra \
+	[2345] zebra $ZEBRA_ARGS \
 	-- Zebra routing daemon
diff --git a/board/common/rootfs/etc/frr/daemons → ...leton-init-finit/skeleton/etc/frr/daemons b/board/common/rootfs/etc/frr/daemons → ...leton-init-finit/skeleton/etc/frr/daemons
@@ -1,5 +1,4 @@
-# Default FRR daemons file for Infix - confd overwrites on routing changes.
-# watchfrr, zebra, mgmtd, and staticd are always started by frrinit.sh.
+# Default FRR daemons file used with watchfrr, started by frrinit.sh.
 ospfd=no
 ripd=no
 bfdd=no
@@ -25,4 +24,3 @@ staticd_options="-A 127.0.0.1"
 bfdd_options="   -A 127.0.0.1"
 
 frr_profile="traditional"
-
diff --git a/board/common/rootfs/etc/frr/frr.conf → ...eton-init-finit/skeleton/etc/frr/frr.conf b/board/common/rootfs/etc/frr/frr.conf → ...eton-init-finit/skeleton/etc/frr/frr.conf
diff --git a/package/skeleton-init-finit/skeleton/etc/frr/mgmtd.conf b/package/skeleton-init-finit/skeleton/etc/frr/mgmtd.conf
@@ -0,0 +1 @@
+! Empty stub — mgmtd reads its own config at startup; file must exist to avoid log noise.
diff --git a/package/skeleton-init-finit/skeleton/etc/frr/ripd.conf b/package/skeleton-init-finit/skeleton/etc/frr/ripd.conf
@@ -0,0 +1 @@
+! Empty stub — mgmtd reads per-daemon configs at startup; file must exist to avoid log noise.
diff --git a/package/skeleton-init-finit/skeleton/etc/frr/ripngd.conf b/package/skeleton-init-finit/skeleton/etc/frr/ripngd.conf
@@ -0,0 +1 @@
+! Empty stub — mgmtd reads per-daemon configs at startup; file must exist to avoid log noise.
diff --git a/package/skeleton-init-finit/skeleton/etc/frr/staticd.conf b/package/skeleton-init-finit/skeleton/etc/frr/staticd.conf
@@ -0,0 +1 @@
+! Empty stub — mgmtd reads per-daemon configs at startup; file must exist to avoid log noise.
diff --git a/package/skeleton-init-finit/skeleton/etc/frr/zebra.conf b/package/skeleton-init-finit/skeleton/etc/frr/zebra.conf
@@ -0,0 +1 @@
+! Empty stub — mgmtd reads per-daemon configs at startup; file must exist to avoid log noise.
diff --git a/patches/firewalld/2.3.1/0001-Silence-warnings-about-old-backends.patch b/patches/firewalld/2.3.1/0001-Silence-warnings-about-old-backends.patch
@@ -1,7 +1,7 @@
 From 03f273fc540082d1eaa23bd9b5847e695afd8283 Mon Sep 17 00:00:00 2001
 From: Joachim Wiberg <[email protected]>
 Date: Thu, 25 Sep 2025 15:00:54 +0200
-Subject: [PATCH] Silence warnings about old backends
+Subject: [PATCH 1/2] Silence warnings about old backends
 Organization: Wires
 
 Signed-off-by: Joachim Wiberg <[email protected]>
Original file line number	Diff line number	Diff line change
		@@ -0,0 +1 @@
		! Empty stub — mgmtd reads its own config at startup; file must exist to avoid log noise.
Original file line number	Diff line number	Diff line change
		@@ -0,0 +1 @@
		! Empty stub — mgmtd reads per-daemon configs at startup; file must exist to avoid log noise.